WattAscentHelp

Help center › Trainers and Bluetooth

Compatible smart trainers

Which smart trainers and smart bikes WattAscent controls over Bluetooth (FTMS), which need a firmware update, and which can only be used for power.

WattAscent sets your trainer's resistance (ERG mode) over Bluetooth FTMS, the standard Bluetooth protocol for smart trainers. Almost every smart trainer and smart bike sold since 2019 supports it, and many older ones got it in a firmware update.

Trainers WattAscent controls

Wahoo

  • KICKR (2022, v6), KICKR MOVE, KICKR CORE 2, KICKR CORE Zwift One, KICKR ROLLR
  • KICKR BIKE (2022), KICKR BIKE SHIFT, KICKR BIKE PRO
  • With firmware from June 2021 or later: KICKR (2018, v4), KICKR (2020, v5), KICKR CORE (2018) and KICKR BIKE (2019). Update in the Wahoo app.

Tacx (Garmin)

  • NEO 3M, NEO Bike Plus
  • With a firmware update: FLUX, FLUX S and FLUX 2 (version 3.3.40 or later), NEO Bike Smart (version 4.5.0 or later). Update in the Tacx Training app.

Elite

  • Avanti, Rivo, Justo, Justo 2, Suito, Suito-T, Direto, Direto X, Direto XR, Direto XR-T, Drivo, Drivo II, Zumo, Tuo
  • The Elite Square frame works through the Elite trainer it sits on.

Zwift and JetBlack

  • Zwift Hub (Classic) and Zwift Hub One. With a Zwift Cog, ERG workouts work normally; virtual shifting is a Zwift feature.
  • Zwift Ride, through the trainer it's mounted on
  • JetBlack Volt, Volt V2 and Victory

Saris

  • H3, H3 Plus, H4, M2

Smart bikes

  • Wattbike Atom (2017), Atom Next Gen, Atom X and Proton
  • Stages SB20 and SB200

Kinetic

  • R1, Road Machine Control, Rock and Roll Control

Magene and Decathlon (Van Rysel)

  • Magene T600, T600 Eco, T300, T300 Plus, T200 and T110
  • Van Rysel D100

Xplova

  • Noza V

Trainers WattAscent can't control

These use an older or brand-specific way of setting resistance that WattAscent doesn't support:

  • Wahoo: KICKR from 2012 to 2017 (v1, v2, v3) and KICKR SNAP
  • Tacx: NEO (2015), NEO 2, NEO 2T, Vortex Smart, Bushido Smart and Genius Smart
  • Saris / CycleOps: Hammer (H1), H2 and Magnus
  • Bkool: Pro, Smart Pro 2, Smart Go and Smart Air
  • Kinetic: Road Machine Smart and other trainers with the inRide sensor (they send power only)
  • Wattbike: Pro and Trainer
  • Any trainer that connects only over ANT+

Most of these still send power over Bluetooth, so you can still ride: connect the trainer under Power meter on the Devices tab, and match the target watts yourself with your gears. The workouts, plans and Coach Watson all work; only the automatic resistance doesn't.

Not on the list?

Look at your trainer's specifications on the manufacturer's website:

  • "Bluetooth FTMS" (or "FTMS") listed: it works with WattAscent.
  • Only "ANT+ FE-C", or "FE-C over Bluetooth" without FTMS: WattAscent can't set its resistance.
  • No Bluetooth or ANT+ at all (a classic fluid or magnetic trainer): add a Bluetooth power meter on your bike and ride by matching the targets with your gears.

Before your first ride

  • Update the firmware in the manufacturer's app (Wahoo, Tacx Training, Elite, Saris, Wattbike Hub, Magene). Several trainers only gained FTMS through an update.
  • One app at a time. Many trainers accept a single Bluetooth connection. Close Zwift, the manufacturer's app and anything on a nearby phone before connecting. See Connecting your smart trainer.
  • Use a browser that can reach Bluetooth: Chrome or Edge on a Windows or Mac computer, or Chrome on Android. Apps for iPhone, iPad and Mac, and for Android, are coming soon.

Updated November 9, 2026

Was this helpful?

Can't find what you need? Ask us, and a person will reply by email.

Contact us